How to clean the ventilation fan

Release time:

2024-01-19

1. Gently unplug the power of the exhaust fan, be careful not to use wet hands to unplug the power.
2. Prepare a neutral cleaning agent and dilute with a small amount of warm water. If there is oil stains, prepare hot water and dishwashing detergent.
3. Use a screwdriver to remove the screws on the outer surface of the exhaust fan, remove the casing, and then remove the exhaust fan blades and filter.
4. After removing the exhaust fan blades and filter, soak them in the prepared cleaning solution, and then use a brush to clean the fan blades and filter. If there is too much oil pollution, clean it with hot water and detergent, or clean it with alkaline water.
5. Dry the cleaned fan blades and filter, and place them in a ventilated area for later use.
6. Soak a cloth in cleaning solution, then wipe the ventilation openings and other stained areas,
7. Install the dried fan blades and filter back into the exhaust fan, then fasten the outer shell and tighten the screws.
8. If the power test shows that the exhaust fan is lightweight and has low noise, it indicates that we have successfully cleaned the exhaust fan. If there are other issues, the installation should be gradually checked for errors.